收藏Favorite | 首頁Home
-
關於我們

About us

宗旨

Mission

機構成員

Organization

業務範圍

Capabilities

人員

Personnel

設備 [ E1 | E2 | E3 ]

Equipment [ E1 | E2 | E3 ]

消防工程服務

Fire Engineering Service

研究

Research

開發

Development

專業訓練

Professional Training

專業技術檢驗

Technical Inspection

質量保證

Quality Assurance

室內空氣質量測量

Indoor Air Quality Measurements

燃氣工程之質量保證

Quality Assurance of Gas Engineering

垂直運輸設備之質量保證

Quality Assurance of Gas Engineering

聯絡方法
Contact
-

檢驗及測驗設備

Equipment for Inspection and Testing

IDQ本身擁有多種先進設備,其中多數是專為工地應用而設的便攜式專門設備:

IDQ has available a diversity of equipment, mostly portable, for specific field applications:

射線探傷儀

  • 「Andrex」Smart 225kV及「TDE」XXG-2505,且備有黑房底片沖灑設備。
  • Iridium-192同位素。

超聲波探傷儀

  • 細小、輕巧的 “Krautkramer” USM-25-DAC,USN-60,用於A-Scan顯示。
  • “Krautkramer” USD-15-SQ (USAF 版) 用於ToFD及四氧化三鐵袧h厚度測試。

超聲波厚度測試器、油漆厚度測試器

  • “Krautkramer” DM4-DL,能量度附有油漆塗層材料的厚度。
  • “DeFelsko” Positector 6000 FN33油漆厚度測試器。

磁粉測試探傷器

  • “Magnaflux” YM5及“Tiede” TWM-42E,紫外燈可作瑩光磁粉測試。

硬度量度計

  • “Krautkramer” MIC-10-DL (Vickers diamond, 5 kgf) 及UltraHARD軟件。

便攜式電解拋光及蝕刻機、機械打磨及拋光機

  • “Struers” Movipol-3 & Transpol-2。

打磨及拋光機、電動鑲嵌機

  • “Struers” Rotopol-31,可備直徑為300mm的磨碟。
  • “Struers” LaboPress-3,可自動鑲嵌金相分析試樣。

紅外熱像儀

  • “FLIR SYSTEMS” ThermaCAM P30。

各類標準參考試塊作校正上述設備之用

Radiography

  • “Andrex” Smart 225kV & “TDE” XXG-2505, with darkroom film developing equipment.
  • Gamma-ray radiography (Iridium-192 source).

Ultrasonics

  • Small, compact “Krautkramer” USM-25-DAC & USN-60 for A-Scan applications.
  • “Krautkramer” USD-15-SQ (USAF version) for ToFD applications and magnetite thickness measurements, with software UltraDoc.

Ultrasonic thickness gauge, coating thickness gauge

  • “Krautkramer” DM4-DL, capable of measuring through coatings (paint).
  • “DeFelsko” Positector 6000 FN33 coating thickness gauge.

Magnetic Particles tester

  • “Magnaflux”YM5, “Tiede” TWM-42E, with UV light.

Hardness tester

  • “Krautkramer” MIC-10-DL (Vickers diamond, 5 kgf), with software UltraHARD.

Electrolytic polishing and etching, Mechanical grinding and polishing

  • “Struers” Movipol-3 & “Struers” Transpol-2.

Grinding and polishing machine, Electro-hydraulic mounting press

  • “Struers” Rotopol-31 with 300mm dia. Disc.
  • “Struers” LaboPress-3, for automatic resin mounting of metallographic specimens.

Thermography Camera

  • “FLIR SYSTEMS” ThermaCAM P30.
Other standard blocks for the usage of calibration of above equipments
© 2008 03 20 Institute for the Development and Quality, Macau. All rights reserved.
Tel:(853) 2837 1008
Fax:(853) 2835 6162
Email:idq_mac@idq.org.mo